Hostname: page-component-7b7567c8c-8tzhz Total loading time: 0 Render date: 2026-11-19T09:12:19.875Z Has data issue: false hasContentIssue false

Crystallization study of the Ta55–Ir45 amorphous alloy

Published online by Cambridge University Press:  29 June 2016

R. J. Wallace
Affiliation:
University of California, Lawrence Livermore National Laboratory, Livermore, California 94550
E. N. Kaufmann
Affiliation:
University of California, Lawrence Livermore National Laboratory, Livermore, California 94550
W. L. Bell
Affiliation:
University of California, Lawrence Livermore National Laboratory, Livermore, California 94550
Get access

Abstract

The crystallization behavior of an arc-melted, splat-quenched amorphous Ta55–Ir45 alloy was investigated by differential thermal analysis (DTA) and transmission electron microscopy (TEM). The DTA experiments showed that the glass transition temperature (Tg) for this material was 485 °C and that the crystallization temperature (Tx) closely followed at 495 °C. This Tx is much lower than has been previously reported. In-situ TEM annealing experiments, in addition to confirming Tx, illustrated that crystallization proceeds as a two-step process. A fcc phase is the first to crystallize at 500 °C followed by the equilibrium phases, α and σ, and/or the bcc Ta phase near 600°–650 °C. Microhardness measurements were made as part of an initial mechanical properties investigation. Inconsistencies with the work of previous investigators of this system are discussed.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 1986

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable