Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T18:52:49.167Z Has data issue: false hasContentIssue false

Cubic (Mg,Zn)O Nanowire Growth Using Catalyst-Driven Molecular Beam Epitaxy

Published online by Cambridge University Press:  03 March 2011

Y.W. Heo
Affiliation:
Kyungpook National University, Department of Inorganic Materials Engineering, Daegu 702-701, Korea
L-C. Tien
Affiliation:
University of Florida, Department of Materials Science and Engineering, Gainesville, Florida 32611
D.P. Norton
Affiliation:
University of Florida, Department of Materials Science and Engineering, Gainesville, Florida 32611
Get access

Abstract

We report on the growth of Mg-rich cubic (Mg,Zn)O nanowires using a catalysis-driven molecular-beam-epitaxy method. Nanowires were grown on both Si and Al2O3 substrates coated with a nominally 2-nm-thick layer of Ag. The (Mg,Zn)O nanowires were grown with a Zn and Mg cation flux, with an O2/O3 mixture serving as the oxidizing species. The growth temperature was 400 °C. Under these conditions, nanowires were observed to grow on the Ag sites. The nanowire diameter was on the order of 90 nm. (Mg,Zn)O nanowires as long as 2 μm were realized. High-resolution transmission electron microscope imagery shows the nanowires had single-phase cubic rock salt structure (Mg,Zn)O with a growth direction along the [100]. The presence and compositional distribution of Mg and Zn in the single nanowire were confirmed using a compositional line-scan, profiled across the nanowire, by energy dispersive spectrometry with scanning transmission electron microscopy.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable