Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-17T13:45:52.221Z Has data issue: false hasContentIssue false

Damping behavior of in situ Al–(graphite, Al4C3) composites produced by reciprocating extrusion

Published online by Cambridge University Press:  31 January 2011

Hsu-Shen Chu
Affiliation:
Department of Materials Science and Engineering, National Tsing Hua University, Hsinchu, Taiwan, Republic of China
Kuo-Shung Liu
Affiliation:
Department of Materials Science and Engineering, National Tsing Hua University, Hsinchu, Taiwan, Republic of China
Jien-Wei Yeh
Affiliation:
Department of Materials Science and Engineering, National Tsing Hua University, Hsinchu, Taiwan, Republic of China
Get access

Abstract

The effect of graphite particles on the damping behavior of 6061 Al–graphite composites was investigated with an aim to develop a high damping, stiffness, and hardness material. The composites were processed by mixing 6061 alloy powder with graphite particles, hot pressed as a billet and consolidated by reciprocating extrusion 10 times. The results showed that the graphite particles were greatly refined and niformly distributed in the matrix. The graphite in situ reacted with the Al matrix to orm fine dispersed Al4C3 particles during both reciprocating extrusion and subsequent olution treatment. The Al4C3 phase could result in a pronounced dispersion trengthening effect. The damping capacity of the composite increased with increasing raphite content. The composite showed a peak in damping capacity during aging reatment. The 6061 Al–20% (graphite, Al4C3) composite solution-treated for 24 h and eak-aged displayed an excellent combination of damping capacity, stiffness, and ardness. The composite retained high damping while maintaining a high modulus ecause of the coexistence of graphite and Al4C3. The operative damping mechanisms, ncluding intrinsic damping of graphite particle, interface damping, dislocation amping, and grain boundary damping, are discussed with consideration of material icrostructure.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable