Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-18T06:17:20.479Z Has data issue: false hasContentIssue false

Deformation characteristics of tin-based solder joints

Published online by Cambridge University Press:  03 March 2011

Antonia Antoniou
Affiliation:
Department of Aerospace Engineering and Engineering Mechanics, Iowa State University, Ames, Iowa 50011
Ashraf F. Bastawros*
Affiliation:
Department of Aerospace Engineering and Engineering Mechanics, Iowa State University, Ames, Iowa 50011
*
a)Address all correspondence to this author. e-mail: bastaw@iastate.edu
Get access

Abstract

A novel experimental configuration was devised to measure the evolution of the deformation field and the corresponding toughness in solder joints for microelectronic packaging. The utilized material system comprised a ductile layer of tin-based solder encapsulated within relatively hard copper shoulders. The experimental configuration provided pure shear state within the constrained solder layer. Different Pb/Sn compositions were tested with grain size approaching the film thickness. The in-plane strain distribution within the joint thickness was measured by a microscopic digital image correlation system. The toughness evolution within such highly gradient deformation field was monitored qualitatively through a two-dimensional surface scan with a nanoindentor. The measurements showed a highly inhomogeneous deformation field within the film with discreet shear bands of concentrated strain. The localized shear bands showed long-range correlations of the order 2–3 grain diameters. A size-dependent macroscopic response on the layer thickness was observed. However, the corresponding film thickness was approximately 100–1000 times larger than those predicted by nonlocal continuum theories and discreet dislocation.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable