Hostname: page-component-7b7567c8c-8p88z Total loading time: 0 Render date: 2026-11-19T17:38:43.797Z Has data issue: false hasContentIssue false

Depth-sensing indentation at macroscopic dimensions

Published online by Cambridge University Press:  31 January 2011

Jeremy Thurn
Affiliation:
Department of Chemical Engineering and Materials Science, University of Minnesota, Minneapolis, Minnesota 55455
Dylan J. Morris
Affiliation:
Department of Chemical Engineering and Materials Science, University of Minnesota, Minneapolis, Minnesota 55455
Robert F. Cook
Affiliation:
Department of Chemical Engineering and Materials Science, University of Minnesota, Minneapolis, Minnesota 55455
Get access

Abstract

A macroscopic-scale depth-sensing indentation apparatus with the ability to be mounted on an inverted microscope for in situ observation of contact events was calibrated using the Oliver and Pharr [J. Mater. Res. 7, 1564 (1992)] procedure with a two-parameter area function. The calibrated Vickers tip was used to determine the projected contact area at peak load and the modulus and hardness of a variety of non-metallic materials through deconvolution of the measured load-displacement traces. The predicted contact area was found to be identical to the measured area of residual contact impressions. Furthermore, for transparent ceramic materials the projected contact area during loading was found to be the same as the area measured from the diagonal of post-indentation residual contact impressions. The modulus and hardness values deconvoluted from the load–displacement traces were compared with independent measurements. The effects of sample clamping, column compliance, and tip radius on the load–displacement data and inferred materials properties were also examined. It is suggested that the simplicity of instrumentation and operation, combined with the ability to observe indentations optically, even in situ, makes macroscopic-scale depth-sensing indentation ideal for fundamental studies of contact mechanics.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable