Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-19T00:00:47.607Z Has data issue: false hasContentIssue false

Determination of phase relations in the Co–Cu–Ti system by the diffusion triple technique

Published online by Cambridge University Press:  03 March 2011

H.S. Liu*
Affiliation:
School of Materials Science and Engineering, Central South University, Changsha, Hunan 410083, People’s Republic of China
Y.M. Wang
Affiliation:
School of Materials Science and Engineering, Central South University, Changsha, Hunan 410083, People’s Republic of China
L.G. Zhang
Affiliation:
School of Materials Science and Engineering, Central South University, Changsha, Hunan 410083, People’s Republic of China
Q. Chen
Affiliation:
Thermo-Calc Software AB, SE – 113 47, Stockholm, Sweden
F. Zheng
Affiliation:
School of Materials Science and Engineering, Central South University, Changsha, Hunan 410083, People’s Republic of China
Z.P. Jin
Affiliation:
School of Materials Science and Engineering, Central South University, Changsha, Hunan 410083, People’s Republic of China
*
a) Address all correspondence to this author. e-mail: hsliu@mail.csu.edu.cn
Get access

Abstract

Two isothermal sections of the Co–Cu–Ti ternary system at 973 and 1123 K were experimentally determined using the diffusion triple technique together with scanning electron microscopy and electron probe microanalysis. The solubility of Cu (substituting Co) in CoTi increased from 22.8 at.% at 973 K to 28.1 at.% at 1123 K while that of Co (substituting Cu) in CuTi decreased from 11.1 to 8.8 at.% accordingly. In addition, the solubility limits of the third element in the binary compounds CoTi2, CuTi2, Cu4Ti3, and Cu3Ti2 were remarkable. Besides the solubility change, we found the Cu2Ti phase was stable at 1123 K but disappeared at 973 K. A ternary compound “m” with a composition range covering Co10Cu57Ti33 was detected at both isothermal sections. An invariant reaction Cu4Ti3 + CoTi ↔ CuTi + m at a temperature between 973 and 1023 K was deduced. Further investigations are necessary to confirm the reactions among Cu, Cu4Ti, Cu2Ti, Cu3Ti2, and “m” between 1023 and 1123 K.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable