Hostname: page-component-7b7567c8c-48dgx Total loading time: 0 Render date: 2026-11-17T21:33:53.671Z Has data issue: false hasContentIssue false

Determination of plastic properties of metals by instrumented indentation using a stochastic optimization algorithm

Published online by Cambridge University Press:  31 January 2011

I. Peyrot
Affiliation:
Laboratory for Mechanics of Materials and Nanostructures, EMPA—Swiss Federal Laboratories for Materials Testing and Research, Feuerwerkerstrasse 39, 3602 Thun, Switzerland
P-O. Bouchard
Affiliation:
Mines ParisTech, CEMEF, Centre de Mise en Forme des Matériaux, UMR CNRS 7635, BP 207, 06904 Sophia-Antipolis Cedex, France
R. Ghisleni
Affiliation:
Laboratory for Mechanics of Materials and Nanostructures, EMPA—Swiss Federal Laboratories for Materials Testing and Research, Feuerwerkerstrasse 39, 3602 Thun, Switzerland
J. Michler*
Affiliation:
Laboratory for Mechanics of Materials and Nanostructures, EMPA—Swiss Federal Laboratories for Materials Testing and Research, Feuerwerkerstrasse 39, 3602 Thun, Switzerland
*
a) Address all correspondence to this author. e-mail: Johann.Michler@empa.ch
Get access

Abstract

A novel optimization approach, capable of extracting the mechanical properties of an elasto-plastic material from indentation data, is proposed. Theoretical verification is performed on two simulated configurations. The first is based on the analysis of the load–displacement data and the topography of the residual imprint of a single conical indenter. The second is based on the load–displacement data obtained from two conical indenters with different semi-angles. In both cases, a semi-analytical approach [e.g., Dao et al., Acta Mater.49, 3899 (2001) and Bucaille et al., Acta Mater.51, 1663 (2003)] is used to estimate Young’s modulus, yield stress, and strain hardening coefficient from the load–displacement data. An inverse finite element model, based on a commercial solver and a newly developed optimization algorithm based on a robust stochastic methodology, uses these approximate values as starting values to identify parameters with high accuracy. Both configurations use multiple data sets to extract the elastic-plastic material properties; this allows the mechanical properties of materials to be determined in a robust way.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2009

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable