Hostname: page-component-7b7567c8c-2jgqx Total loading time: 0 Render date: 2026-11-19T10:57:55.267Z Has data issue: false hasContentIssue false

Dislocations, twins, and grain boundaries in CVD diamond thin films: Atomic structure and properties

Published online by Cambridge University Press:  31 January 2011

J. Narayan
Affiliation:
Materials Science and Engineering Department, North Carolina State University, Raleigh, North Carolina 27695-7916
Get access

Abstract

We have used transmission electron microscopy techniques to study the nature of dislocations, stacking faults, twins, and grain boundaries in CVD (chemical-vapor-deposition) diamond thin films. Perfect a/2〈110〉 and partial a/6〈112〉 and a/3〈111〉 type dislocations are observed; the partial dislocations are also associated with twins and stacking faults. The most common defect in diamond thin films, particularly in 〈110〉 textured films, is Σ = 3 grain boundary or the primary twin. These twins in 〈110〉 textured films can lead to formation of fivefold microcrystallites. We have also investigated the splitting of Σ = 9 grain boundary (second order twin) into two Σ = 3 boundaries or primary twins via reaction Σ9 = 2Σ3. A rapid thermal annealing treatment has been shown to result in annealing of Σ = 3 boundaries and produce “defect-free” regions in thin films. A mechanism of annealing (removal) of Σ = 3 boundaries is discussed. Atomic structure and energetics of dislocations, twins, and grain boundaries are calculated using Tersoff potentials. The calculated atomic structure for Σ = 3 boundary is compared with high-resolution TEM images and a good agreement is obtained. These boundaries consist of periodic units of 5–7 rings which are similar to the core structure of 90° a/2〈110〉{001} dislocations. The energy of the 5–7 rings in the grain boundaries is considerably lower, due to overlapping and strain cancellation effects, than that associated with single dislocations. The 5–7 ring energy and consequently the boundary energy increases as the overlapping effects decrease. An interesting analogy between the diamond and silicon results is drawn.

Information

Type
Diamond and Diamond-Like Materials
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable