Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T23:53:37.319Z Has data issue: false hasContentIssue false

Effect of substrate deformation on the microcantilever beam-bending test

Published online by Cambridge University Press:  31 January 2011

Tong-Yi Zhang
Affiliation:
Department of Mechanical Engineering, Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong, Peoples Republic of China
Ming-Hao Zhao
Affiliation:
Department of Mechanical Engineering, Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong, Peoples Republic of China
Cai-Fu Qian
Affiliation:
Department of Mechanical Engineering, Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong, Peoples Republic of China
Get access

Abstract

With regard to substrate deformation, this work analyzed the microcantilever beam-bending test and provided a closed formula of deflection versus load. The substrate deformation was formulated using two coupled springs; the spring compliances were related to the elastic compliances of the substrate, the support angle between the substrate and the microcantilever beam, and the beam thickness. Finite element analysis was conducted to calculate the spring compliances and verify the analytic formula. The results showed that the proportionality factor of the load to the deflection was a third-order polynomial of the length from the loading point to the fixed beam end. Examples are also given to indicate the relative error of Young's modulus when evaluated with the beam-bending theory without considering the substrate deformation.

Information

Type
Rapid Communications
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable