Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-18T07:20:30.054Z Has data issue: false hasContentIssue false

Effects of hydrogenated amorphous carbon interlayer on diamond nucleation

Published online by Cambridge University Press:  31 January 2011

W. S. Yang
Affiliation:
Department of Materials Science and Engineering, Pohang University of Science –784, Republic of Korea
T. S. Kim
Affiliation:
Department of Materials Science and Engineering, Pohang University of Science –784, Republic of Korea
Jung Ho Je*
Affiliation:
Department of Materials Science and Engineering, Pohang University of Science –784, Republic of Korea
*
a) Corresponding author jhje@postech.ac.kr.
Get access

Abstract

Diamond was deposited at 850 °C by microwave plasma chemical vapor deposition (CVD) on the interlayers with various intensity ratios (ID/IG) of the D band (~1400 cm-1) to the G band (~1570 cm-1) in the Raman spectra. Diamond could be grown only on the interlayers with higher ID/IG (≤1.95), and Nd was slightly increased to 3 × 106/cm2with ID/IG. The predeposition at 350 °C, which decreased the full-width at half-maximum of the broad D band, further increased Nd to 5 × 107/cm2. With 300 ÅA Pt overlayer on the interlayer, Nd was much more enhanced to 8 × 107/cm2. We suggest the sp3 bonded carbon clusters within the interlayer contribute to diamond nucleation, but they should be survived against atomic hydrogen etching during diamond deposition by increasing the sp3/sp2 ratio, by increasing the degree in clustering, or by protecting them with overlayer.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable