Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T20:35:10.733Z Has data issue: false hasContentIssue false

Effects of loading rate on the deformation and cracking of dental multilayers: Experiments and models

Published online by Cambridge University Press:  01 April 2006

Xinrui Niu*
Affiliation:
Princeton Institute of Science and Technology of Materials (PRISM) and the Department of Mechanical and Aerospace Engineering, Princeton University, Princeton, New Jersey, 08544
Wole Soboyejo
Affiliation:
Princeton Institute of Science and Technology of Materials (PRISM) and the Department of Mechanical and Aerospace Engineering, Princeton University, Princeton, New Jersey, 08544
*
a) Address all correspondence to this author. e-mail: xniu@princeton.edu
Get access

Abstract

The paper presents the results of combined experimental, analytical, and computational studies of contact-induced deformation and cracking in dental multilayers. These include studies of individual layers and composite structures that consist of tri-layers of glass bonded to ceramic-filled polymer foundation with an acrylate-based join material. Loading-rate-dependent Young's moduli of the join and foundation materials were obtained from monotonic compression tests. Critical loads were also determined for the tri-layers from Hertzian contact tests at different loading rates. The fracture onset (sub-surface radial cracking) was detected using an in situ telescope. The measured rate-dependent Young's moduli were then incorporated into a finite element model that was used to predict the rate-dependent critical loads in the tri-layer system. Finally, the paper shows that the observed loading rate-dependence of the critical load (for radial cracking) is due to the combined effects of slow crack growth in glass and rate-dependent Young's moduli in the join and foundation layers.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable