Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T16:03:18.851Z Has data issue: false hasContentIssue false

Epitaxy, microstructure, and processing-structure relationships of TiO2 thin films grown on sapphire (0001) by MOCVD

Published online by Cambridge University Press:  03 March 2011

H.L.M. Chang
Affiliation:
Materials Science Division, Argonne National Laboratory, Argonne, Illinois 60439–4838
T.J. Zhang
Affiliation:
Materials Science Division, Argonne National Laboratory, Argonne, Illinois 60439–4838
H. Zhang
Affiliation:
Materials Science Division, Argonne National Laboratory, Argonne, Illinois 60439–4838
J. Guo
Affiliation:
Materials Science Division, Argonne National Laboratory, Argonne, Illinois 60439–4838
H.K. Kim
Affiliation:
Materials Science Division, Argonne National Laboratory, Argonne, Illinois 60439–4838
D.J. Lam
Affiliation:
Materials Science Division, Argonne National Laboratory, Argonne, Illinois 60439–4838
Get access

Abstract

TiO2 thin films have been deposited on sapphire (0001) substrates under various conditions by metal-organic chemical vapor deposition. The structural properties of the deposited films were characterized by x-ray diffraction and transmission electron microscopy. The important growth parameters were found to be the deposition temperature and the deposition rate. The ranges studied for the two parameters were 400 to 850 °C and 10 to 120 Å/min, respectively. Depending on the growth conditions, most of the deposited films were either single-phase anatase or rutile, or a mixture of the two. These films were all epitaxial, but none of them were single-crystal films. Three distinct epitaxial relationships were observed between the films and the substrates, and, depending on the growth conditions, a deposited film can contain one, two, or all three of them. The fact that the films we obtained, although epitaxial, were never single crystal is explained based on the consideration of the difference in the rotational symmetries of the substrate surface and the film growth plane. We believe that it should be generally true that, in heteroepitaxial growth, a true single-crystal film can never be obtained as long as the point symmetry group of the substrate surface is not a subgroup of that of the film growth plane.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable