Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T04:50:46.626Z Has data issue: false hasContentIssue false

Fabrication of titanium-based microstructured surfaces and study on their superhydrophobic stability

Published online by Cambridge University Press:  31 January 2011

Baojia Li
Affiliation:
Center for Photon Manufacturing Science and Technology, Jiangsu University, Zhenjiang, Jiangsu, China 212013
Ming Zhou*
Affiliation:
Center for Photon Manufacturing Science and Technology, Jiangsu University, Zhenjiang, Jiangsu, China 212013
Run Yuan
Affiliation:
Center for Photon Manufacturing Science and Technology, Jiangsu University, Zhenjiang, Jiangsu, China 212013
Lan Cai
Affiliation:
Center for Photon Manufacturing Science and Technology, Jiangsu University, Zhenjiang, Jiangsu, China 212013
*
a)Address all correspondence to this author. e-mail: zm2109@126.com or zm_laser@126.com
Get access

Abstract

Based on the classical wetting theories, two theoretically predicted formulas of the apparent contact angles on square-pillar-array microstructured surfaces for Wenzel mode and Cassie mode have been derived, respectively. The theories of superhydrophobic stability on microstructured surfaces have been summarized. Four square-pillar-array samples were fabricated on titanium substrates by using the femtosecond laser micromachining technology, and wettability was analyzed by both experimental and analytical methods. The results showed that the titanium-based surfaces are superhydrophobic. The maximal apparent contact angle is up to 156.9°, while the corresponding sliding angle is 4.7°. Testing of the superhydrophobic stability of the surfaces showed that the maximal deviation of the apparent contact angles is only 0.6°. Analyses indicate that the stable superhydrophobicity of the supplied titanium-based surfaces is within a certain range and not perfect. To improve that, a practical controllable method is proposed herein for the design of a stable superhydrophobic surface.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable