Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T01:50:01.890Z Has data issue: false hasContentIssue false

Fine-Grain Processing by Equal Channel Angular Extrusion of Rapidly Quenched Bulk Mg–Y–Zn Alloy

Published online by Cambridge University Press:  03 March 2011

Hiroyuki Watanabe
Affiliation:
Osaka Municipal Technical Research Institute, Osaka 536–8553, Japan
Hidetoshi Somekawa
Affiliation:
Department of Metallurgy and Materials Science, Osaka Prefecture University,Sakai 599–8531, Japan
Kenji Higashi
Affiliation:
Department of Metallurgy and Materials Science, Osaka Prefecture University,Sakai 599–8531, Japan
Get access

Abstract

The fine-grain processing of ingot metallurgy (IM) Mg–Y–Zn alloy, WZ73, was investigated. The alloy was initially produced by casting into a copper mold at a cooling rate of ∼50 K/s. The rapidly quenched bulk material was processed by means of equal channel angular extrusion (ECAE). The ECAE-processed material had equiaxed grains of 5.1 μm in size, and fine second-phase particles of Mg12YZn were dispersed in the grain boundaries. The Vickers hardness of the ECAE-processed material was 78. The dispersion of the second-phase particles, solid solution strengthening, and grain refinement contributed to the material’s hardness. The structure remained virtually unchanged, at least up to 673 K because the Mg12YZn phase served to pin the grain boundaries. The microstructure of IM WZ73 alloy, which is a suitable starting material for ECAE, was also considered.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable