Hostname: page-component-7b7567c8c-8p88z Total loading time: 0 Render date: 2026-11-19T17:00:20.712Z Has data issue: false hasContentIssue false

Flocculation after injection molding in ceramic suspensions

Published online by Cambridge University Press:  03 March 2011

J.H. Song
Affiliation:
Department of Materials Technology, Brunel University, Uxbridge Middlesex, UB8 3PH, United Kingdom
J.R.G. Evans
Affiliation:
Department of Materials Technology, Brunel University, Uxbridge Middlesex, UB8 3PH, United Kingdom
Get access

Abstract

The flocculation of an unstabilized suspension of fine ceramic particles is advanced as the explanation for the formation of cracks in a “liquid” suspension. The development of cracks was observed several minutes after reheating wax-based ceramic moldings above the melting point of the wax and was accompanied by phase separation of the wax from the molding. Calculations of the acceleration of particles under London dispersion forces in a viscous fluid show the “time to impact” as a function of initial separation distance, fluid viscosity, and particle size. This is compared with the intercollision time calculated from classical flocculation theory, and it is shown that for crowded suspensions initial interparticle distances are such that the London force field cannot be neglected. Methods of preventing the flocculation are described.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable