Hostname: page-component-7b7567c8c-8tzhz Total loading time: 0 Render date: 2026-11-19T17:56:28.461Z Has data issue: false hasContentIssue false

Formation of TiSi2 on nitrogen ion implanted (001)Si

Published online by Cambridge University Press:  26 July 2012

S. L. Cheng
Affiliation:
Department of Materials Science and Engineering, National Tsing Hua University, Hsinchu, Taiwan, Republic of China
L. J. Chen
Affiliation:
Department of Materials Science and Engineering, National Tsing Hua University, Hsinchu, Taiwan, Republic of China
B. Y. Tsui
Affiliation:
Electronics Research and Service Organization, Industrial Technology and Research Institute, Hsinchu, Taiwan, Republic of China
Get access

Extract

Formation of TiSi2 on nitrogen ion implanted (001)Si has been investigated. Nitrogen ion implantation was found to suppress the B and As diffusion in silicon. For Ti on 30 keV BF2+−20 keV N2+ and 30 keV As+−20 keV N2+ implanted samples, a continuous low-resistivity TiSi2 layer was found to form in all samples annealed at 700–900 °C. For Ti on 1 ×1015/cm2 N2+ 1- and As+ implanted samples, end-of-range defects were completely eliminated in all samples annealed at 700–900 °C. The results indicated that with appropriate control, N+-implantation can be successfully implemented in forming low-resistivity TiSi2 contacts on shallow junctions in deep submicron devices.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable