Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-19T00:40:56.592Z Has data issue: false hasContentIssue false

Fracture mode transitions in brittle coatings on compliant substrates as a function of thickness

Published online by Cambridge University Press:  03 March 2011

Herzl Chai
Affiliation:
Materials Science and Engineering Laboratory, National Institute of Standards and Technology, Gaithersburg, Maryland 20899
Brian R. Lawn*
Affiliation:
Materials Science and Engineering Laboratory, National Institute of Standards and Technology, Gaithersburg, Maryland 20899
*
a)Address all correspondence to this author.e-mail: brian.lawn@NIST.gov
Get access

Abstract

The fundamentally changing nature of fracture in brittle coatings on compliant substrates with diminishing coating thickness is examined. Attention is focused on cracking induced by concentrated loading with a spherical indenter at the top surface. It is shown that the fracture mode undergoes transitions, from top-surface ring cracking around the contact (“thick-coating” region) to bottom-surface radial cracking at the lower ceramic surface (“intermediate” region) and, finally, back to surface ring cracking (“thin-coating” region). These transitions reflect a progressively changing stress field in the layer structures and highlight the differences in failure mechanism that may be anticipated at the large- and small-scale levels. Simple fracture relations are derived for each mode, expressing critical loads in terms of coating thickness relative to contact or sphere radius, coating strength and coating/substrate modulus mismatch. Data from finite element simulations and contact experiments on model ceramic/polymer bilayer systems are used to validate the basic elements of the analytical relations and to quantify deviations. Implications of the transitional behavior in relation to the strength of brittle coating/film systems are discussed.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable