Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T23:44:56.624Z Has data issue: false hasContentIssue false

Growth characteristics of BaxSr(1−x)TiO3 thin films produced by micro-arc oxidation

Published online by Cambridge University Press:  07 April 2020

Min Wang*
Affiliation:
College of Mechanical Engineering, Guangdong Polytechnic Normal University, Guangzhou 510635, China; and School of Materials Science and Engineering, South China University of Technology, Guangzhou 510641, China
Xi Zuo
Affiliation:
College of Mechanical Engineering, Guangdong Polytechnic Normal University, Guangzhou 510635, China
Kang Li
Affiliation:
School of Materials Science and Engineering, South China University of Technology, Guangzhou 510641, China
Kang Wang
Affiliation:
College of Mechanical Engineering, DongGuan University of Technology, Dongguan 523808, China
Guoge Zhang
Affiliation:
School of Materials Science and Engineering, South China University of Technology, Guangzhou 510641, China
*
a)Address all correspondence to this author. e-mail: wangmin@gpnu.edu.cn
Get access

Abstract

BaxSr(1−x)TiO3 (BST) thin films were fabricated on a Ti substrate using micro-arc oxidation (MAO) in an aqueous solution with the addition of 0.6 M Ba(OH)2, 0.4 M Sr(OH)2, and 0.05 M EDTA. The morphology, composition, and electrical properties of BST films prepared under different processing times were characterized, and MAO growth characteristics of BST films were discussed. Results indicate that dielectric and ferroelectric properties of BST films are positively correlated with surface morphology dependent on MAO spark patterns. To obtain a smooth and compact film, the large spark stage should be avoided. During MAO processes, elements from the substrate and electrolyte solution migrate in opposite directions under an electric field, resulting in Ba, Sr, Ti, and O elements exhibiting a gradient distribution between the BST film and the Ti substrate. BST film prepared using MAO is composed of two layers: an outer loose layer and an inner dense layer. In addition, because of the position of discharge breakdown continually changing, the interface between the film and the substrate is uneven. As MAO processing time increases, BST film thickness increases and ferroelectric property improves. When processing time is 15 min, the residual polarization intensity (2Pr) of the BST film is about 4.9 μC/cm2.

Information

Type
Article
Copyright
Copyright © Materials Research Society 2020

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable