Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T22:33:10.361Z Has data issue: false hasContentIssue false

High temperature mechanical properties of Cr2Nb-based intermetallics

Published online by Cambridge University Press:  03 March 2011

T. Takasugi
Affiliation:
Institute for Materials Research, Tohoku University, Katahira 2-1-1, Aoba-ku, Sendai, 980 Japan
S. Hanada
Affiliation:
Institute for Materials Research, Tohoku University, Katahira 2-1-1, Aoba-ku, Sendai, 980 Japan
K. Miyamoto
Affiliation:
Institute for Materials Research, Tohoku University, Katahira 2-1-1, Aoba-ku, Sendai, 980 Japan
Get access

Abstract

The results of high-temperature compressive deformation tests on a two-phase alloy consisting of Cr2Nb, a C15 Laves phase, and a soft Nb-based solid solution, are presented along with measurements of oxidation kinetics at 1273 K in air. These alloys are deformable only at temperatures above 1273 K. The measured 0.2% yield stress decreases steadily with increasing temperature and is only slightly sensitive to alloy composition. The steady state flow stress decreases steadily with increasing temperature and depends on alloy composition. A constitutive equation was fitted to the experimental data with a composition-independent stress exponent of about 2.7 and an apparent activation energy which ranges between 477 and 391 kJ/mol, also depending on alloy composition. Microstructural examination shows that cracking (cavitation) and interfacial sliding between the two constituent phases, in addition to bulk deformation of the constituent phases, are responsible for the deformation. The oxidation resistance of these alloys is very good.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable