Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-19T01:40:45.341Z Has data issue: false hasContentIssue false

High-energy storage performance in BaTiO3-based lead-free multilayer ceramic capacitors

Published online by Cambridge University Press:  05 November 2020

Huijing Yang
Affiliation:
Department of Materials Science and Engineering, University of Sheffield, Sheffield S1 3JD, UKDepartment of Physics, Tangshan Normal University, Tangshan 063000, China
Weichao Bao
Affiliation:
State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Shanghai 200050, China
Zhilun Lu
Affiliation:
Department of Materials Science and Engineering, University of Sheffield, Sheffield S1 3JD, UKThe Henry Royce Institute, Sir Robert Hadfield Building, Sheffield S1 3JD, UK
Linhao Li
Affiliation:
Department of Materials Science and Engineering, University of Sheffield, Sheffield S1 3JD, UK
Hongfen Ji
Affiliation:
Department of Materials Science and Engineering, University of Sheffield, Sheffield S1 3JD, UKLaboratory of Thin Film Techniques and Optical Test, Xi'an Technological University, Xi'an 710032, China
Yuhe Huang
Affiliation:
Department of Materials Science and Engineering, University of Sheffield, Sheffield S1 3JD, UK
Fangfang Xu
Affiliation:
State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Shanghai 200050, China
Ge Wang*
Affiliation:
Department of Materials Science and Engineering, University of Sheffield, Sheffield S1 3JD, UK
Dawei Wang*
Affiliation:
Department of Materials Science and Engineering, University of Sheffield, Sheffield S1 3JD, UK
*
a)Address all correspondence to these authors. e-mail: g.wang@sheffield.ac.uk
Get access

Abstract

Lead-free BaTiO3 (BT)-based multilayer ceramic capacitors (MLCCs) with the thickness of dielectric layers ~9 μm were successfully fabricated by tape-casting and screen-printing techniques. A single phase of the pseudo-cubic structure was revealed by X-ray diffraction. Backscattered images and energy-dispersive X-ray elemental mapping indicated the high quality of MLCCs without observation of interaction, wrapping, or delamination. The relaxor state was confirmed by transmission electron microscopy and temperature-dependent permittivity. Impedance spectroscopy at various temperatures revealed the electrical heterogeneous response for MLCCs with high-resistive electrical components. Improved energy storage performance was obtained by multilayering, comparing with the bulk ceramics. Enhanced recoverable energy density ~6.88 J/cm3 with high efficiency ~90% were realized under an electric field of 820 kV/cm, which is mainly attributed to the intrinsic high-resistivity and relaxor behavior. Furthermore, good temperature (20–85 °C) and frequency stabilities (0.5–50 Hz) were observed in the MLCCs, which are attractive for pulsed power applications.

Information

Type
Article
Copyright
Copyright © The Author(s), 2020, published on behalf of Materials Research Society by Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable