Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-18T05:25:32.941Z Has data issue: false hasContentIssue false

Hydraulic activity and microstructural characterization of new fly ash–belite cements synthesized at different temperatures

Published online by Cambridge University Press:  31 January 2011

A. Guerrero
Affiliation:
Institute of Construction Science “Eduardo Torroja” CSIC, Serrano Galvache s/n 28033, Madrid, Spain
S. Goñi
Affiliation:
Institute of Construction Science “Eduardo Torroja” CSIC, Serrano Galvache s/n 28033, Madrid, Spain
A. Macías
Affiliation:
Institute of Construction Science “Eduardo Torroja” CSIC, Serrano Galvache s/n 28033, Madrid, Spain
M. P. Luxán
Affiliation:
Institute of Construction Science “Eduardo Torroja” CSIC, Serrano Galvache s/n 28033, Madrid, Spain
Get access

Abstract

The influence of the synthesis temperature of a new fly ash–belite cement (FABC) on its hydraulic activity and microstructural characteristics is discussed in this work. Three types of FABC were synthesized at 700, 800, and 900 °C after a previous hydrothermal treatment at 200 °C of the fly ash, CaO, and water mixture. The hydraulic activity of the pastes was evaluated during a period of 200 days from mixing through the combined water content, previously determined from thermogravimetric analyses, and the hydration advance degree by x-ray diffraction (XRD). The microstructure characterization of the pastes was studied by scanning electron microscopy (SEM).

Information

Type
Articles
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable