Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-19T05:37:30.011Z Has data issue: false hasContentIssue false

Initial interfacial reaction layers formed in Sn–3.5Ag solder/electroless Ni–P plated Cu substrate system

Published online by Cambridge University Press:  31 January 2011

Han-Byul Kang
Affiliation:
School of Advanced Materials Science & Engineering and Center for Nanotubes & Nanostructured Composites, Sungkyunkwan University, Suwon 440-746, South Korea
Jae-Wook Lee
Affiliation:
School of Advanced Materials Science & Engineering and Center for Nanotubes & Nanostructured Composites, Sungkyunkwan University, Suwon 440-746, South Korea
Jee-Hwan Bae
Affiliation:
School of Advanced Materials Science & Engineering and Center for Nanotubes & Nanostructured Composites, Sungkyunkwan University, Suwon 440-746, South Korea
Min-Ho Park
Affiliation:
School of Advanced Materials Science & Engineering and Center for Nanotubes & Nanostructured Composites, Sungkyunkwan University, Suwon 440-746, South Korea
Jeong-Won Yoon
Affiliation:
School of Advanced Materials Science & Engineering, Sungkyunkwan University, Suwon 440-746, South Korea
Seung-Boo Jung
Affiliation:
School of Advanced Materials Science & Engineering, Sungkyunkwan University, Suwon 440-746, South Korea
Jae-Seon Ju
Affiliation:
Cooperative Center for Research Facilities, Sungkyunkwan University, Suwon 440-746, South Korea
Cheol-Woong Yang*
Affiliation:
School of Advanced Materials Science & Engineering and Center for Nanotubes & Nanostructured Composites, Sungkyunkwan University, Suwon 440-746, South Korea
*
a)Address all correspondence to this author. e-mail: cwyang@skku.edu
Get access

Abstract

Analytical electron microscopy (AEM) was used to examine the initial interfacial reaction layers between a eutectic Sn–3.5Ag solder and an electroless nickel-immersion gold-plated (ENIG) Cu substrate during reflow at 255 °C for 1 s. AEM confirmed that a thick upper (Au,Ni)Sn2 layer and a thin Ni3Sn4 layer had formed through the reaction between the solder and ENIG. The amorphous electroless Ni(P) plated layer transformed into two P-rich Ni layers. One is a crystallized P-rich Ni layer, and the other is an intermediate state P-rich Ni layer before the crystallization. The crystallized P-rich layer consisted of Ni2P and Ni12P5. A thin Ni2P layer had formed underneath the Ni3Sn4 layer and is believed to be a predecessor of the Ni2SnP ternary phase. A Ni12P5 phase was observed beneath the Ni2P thin layer. In addition, nanocrystalline Ni was found to coexist with the amorphous Ni(P) phase in the intermediate state P-rich Ni layer.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable