Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-18T18:41:34.910Z Has data issue: false hasContentIssue false

Instrumented pyramidal and spherical indentation of polycrystalline graphite

Published online by Cambridge University Press:  03 March 2011

M. Sakai*
Affiliation:
Department of Materials Science, Toyohashi University of Technology, Tempaku-cho, Toyohashi 441-8580, Japan
Y. Nakano
Affiliation:
Department of Materials Science, Toyohashi University of Technology, Tempaku-cho, Toyohashi 441-8580, Japan
*
a)Address all correspondence to this author. This author was an editor of this journal during the review and decision stage. For the JMR policy on review and publication of manuscripts authored by editors, please refer to http://www.mrs.org/publications/jmr/policy.html e-mail: msakaitutms.tut.ac.jp
Get access

Abstract

The elastoplastic surface deformation of a polycrystalline graphite was studied by examining the indenter’s geometry dependence of load P versus penetration depth h relation (P–h relation) in instrumented pyramidal/spherical indentation tests. The tetrahedral pyramid indenters included inclined face angles β of 10.0°, 22.0° (Vickers pyramid), and 40.0°. The tip radius of spherical indenters used were 32 μm, 200 μm, 794 μm, 1.59 mm, and 6.35 mm. The true hardness H as a measure for plasticity was singled out of the elastoplastic loading parameter k1 in the quadratic expression of P = k1h2 and then quantitatively related to the yield stress Y that was determined from the mean contact pressure for spherical indentation at the onset of plastic yielding. The size effect of Y, decreasing with the increase in the tip radius of spherical indenter, is discussed using the model of geometrically necessary dislocations in terms of the material length scales for a plastic field with strain gradient.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable