Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T21:04:58.596Z Has data issue: false hasContentIssue false

Library Preparation using an Aspirating-Dispensing Ink-Jet Printer for Combinatorial Studies in Ceramics

Published online by Cambridge University Press:  03 March 2011

Jian Wang
Affiliation:
Department of Materials, Queen Mary, University of London, London E1 4NS, United Kingdom
Julian R.G. Evans*
Affiliation:
Department of Materials, Queen Mary, University of London, London E1 4NS, United Kingdom
*
a)Address all correspondence to this author. e-mail: j.r.g.evans@qmul.ac.uk
Get access

Abstract

This paper describes an aspirating-dispensing ink-jet printer embedded in a combinatorial robot for high throughput studies in ceramics; LUSI, the London University Search Instrument. The process of reformatting well-plates from source inks and printing ceramic samples is described. Precautions against evaporation, sedimentation of colloidal suspensions, and segregation of mixtures during drying are taken to convert compositions specified in a spreadsheet into the form of ∼1 mm radius drops. It is concluded that when these precautions are taken, commercially available powders can be combinatorially mixed in LUSI to produce samples of2.4 mg to within 1–3 wt% accuracy.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable