Hostname: page-component-7b7567c8c-9cwtv Total loading time: 0 Render date: 2026-11-19T18:37:26.731Z Has data issue: false hasContentIssue false

Mechanical behavior of fine-grained Mg-6.5Li at elevated temperature

Published online by Cambridge University Press:  03 March 2011

Eric M. Taleff
Affiliation:
Department of Mechanical Engineering, Stanford University, Stanford, California 94305
Oleg D. Sherby
Affiliation:
Department of Materials Science and Engineering, Stanford University, Stanford, California 94305
Get access

Abstract

A Mg-6.5 wt. % Li alloy containing 80% hep alpha phase and 20% bcc beta phase was processed to achieve an average grain size of 5.9 μm. Strain-rate-change tests were performed in the temperature range from 398 K to 573 K. Two types of creep behavior were observed. A stress exponent of five, obtained at low temperatures and high stresses, is attributed to a diffusion-controlled dislocation creep process in the alpha matrix. A stress exponent of three, obtained at high temperatures and low stresses, is attributed to a solute-drag controlled dislocation creep process in the alpha matrix.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable