Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T19:19:51.363Z Has data issue: false hasContentIssue false

Mechanical loss in a glass-epoxy composite

Published online by Cambridge University Press:  31 January 2011

Manfred Weller
Affiliation:
Max-Planck-Institut für Metallforschung, Institut für Werkstoffwissenschaft, Stuttgart, Federal Republic of Germany
Hassel Ledbetter
Affiliation:
Materials Science and Engineering Laboratory, National Institute of Standards and Technology, Boulder, Colorado 80303
Get access

Abstract

Using a computer-controlled inverted torsion pendulum at frequencies near 1 Hz, we determined the mechanical losses in a uniaxially fiber-reinforced composite. The composite comprised glass fibers in an epoxy-resin matrix. We studied three fiber contents: 0,41, and 49 vol.%. Three mechanical-loss peaks appeared: above 300 K, near 200 K, and near 130 K. They correspond closely to α, β, and γ peaks found previously in many polymers. We failed to see a mechanical-loss peak for either the glass or the glass-resin interface. Between 300 and 4 K, the torsion modulus increased in the resin by a factor of 3.30 and in the 0.49 glass-epoxy by a factor of 2.37.

Information

Type
Materials Communications
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable