Hostname: page-component-7b7567c8c-8tzhz Total loading time: 0 Render date: 2026-11-19T13:23:40.353Z Has data issue: false hasContentIssue false

Mechanical properties from instrumented indentation: Uncertainties due to tip-shape correction

Published online by Cambridge University Press:  31 January 2011

L. E. Seitzman
Affiliation:
Naval Research Laboratory, Code 6176, Washington, DC 20375
Get access

Abstract

The quality of hardness H and indentation modulus E* measurements from instrumented indentation is investigated. Load-displacement data from glass and sapphire are obtained by Vickers indentation and converted to H and E* through a series of equations, including those for tip-shape correction. The quality of H and E* is determined by calculating the statistical uncertainty at each step and propagating the uncertainty to the next step. Conventional tip-shape corrections, assuming either constant hardness or constant modulus, introduce significant errors in H and E* when single, continuous correction functions are used. Piecewise correction functions are shown to improve the quality of H and E*. This investigation demonstrates the importance of calculating and propagating uncertainty at each step when converting instrumented indentation load-displacement data to mechanical properties.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable