Hostname: page-component-7b7567c8c-8p88z Total loading time: 0 Render date: 2026-11-19T18:47:45.257Z Has data issue: false hasContentIssue false

A method of monitoring water absorption in polymers using a depth sensing indentation system

Published online by Cambridge University Press:  31 January 2011

I. A. Ashcroft
Affiliation:
Department of Materials Engineering, University of Wollongong, New South Wales, 2522, Australia
G. M. Spinks*
Affiliation:
Department of Materials Engineering, University of Wollongong, New South Wales, 2522, Australia
*
a) Address all correspondence to this author.
Get access

Abstract

The mechanical properties of many polymers are known to change as they absorb water. This fact has been used to monitor the absorption of water into the surface layers of an epoxy adhesive with a depth sensing indentation system. Two methods have been demonstrated. The sample can be immersed in water for a period of time and then removed and tested in air. Alternatively, the sample can be tested in in situ. In the second method the transport of water through the adhesive can clearly be seen in hardness/depth profiles. Hardness, elastic modulus, and creep strain of the adhesive change with time until a stable value is reached, which corresponds to full plasticization of the adhesive to the influence depth of the indenter. The initial mechanical properties of the epoxy are mostly recovered on drying.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable