Hostname: page-component-7b7567c8c-p67k6 Total loading time: 0 Render date: 2026-11-19T10:34:53.634Z Has data issue: false hasContentIssue false

Microstructural characterization and crystallization kinetics of (1-x)TeO2-0.10CdF2-xPbF2 (x = 0.05, 0.10, and 0.15 mol) glasses

Published online by Cambridge University Press:  31 January 2011

Demet Tatar*
Affiliation:
Department of Metallurgical and Materials Engineering, Faculty of Chemical and Metallurgical Engineering, Istanbul Technical University, Maslak 34469 Istanbul, Turkey
M. Lutfi Öveçoğlu
Affiliation:
Department of Metallurgical and Materials Engineering, Faculty of Chemical and Metallurgical Engineering, Istanbul Technical University, Maslak 34469 Istanbul, Turkey
Gonul Özen
Affiliation:
Department of Physics, Faculty of Science and Letters, Istanbul Technical University, Maslak 34469 Istanbul, Turkey
Scott A. Speakman
Affiliation:
Massachusetts Institute of Technology, Cambridge, Massachusetts 02139
*
a) Address all correspondence to this author. e-mail: demettatar@yahoo.com
Get access

Abstract

Microstructural characterization and crystallization kinetics of (1-x)TeO2-0.10CdF2-xPbF2 (x = 0.05, 0.10, and 0.15 in molar ratio) glasses were investigated using differential thermal analysis (DTA), x-ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy/energy dispersive spectrometer (SEM/EDS), and absorbance spectroscopy techniques. For all of the glass compositions only one exothermic peak was observed on the DTA plots, and on the basis of the XRD and Raman spectrophotometry investigations it was understood that they refer to the formation of the α-TeO2 phase. SEM/EDS investigations revealed the presence of oriented needle-like α-TeO2 crystals in the 0.85TeO2-0.10CdF2-0.05PbF2 glass, rectangle-shaped α-TeO2 crystals in the 0.80TeO2-0.10CdF2-0.10PbF2 glass, and disoriented needle-like crystals in the 0.75TeO2-0.10CdF2-0.15PbF2 glass. DTA analyses were carried out at different heating rates, and the Avrami constants for all of the glasses were approximately 1. The activation energy calculations and SEM investigations demonstrated that the formation of the crystalline phases occurred via surface crystallization mechanism for all of the glasses. Activation energies for crystallization in these glasses were determined from the modified Kissinger plots and were found to vary between 67 and 183 kJ/mol. The addition of PbF2 as a network modifier into the glass structure contributes to the intensity of the Raman peaks change and forced the transition of the glass network from TeO4 trigonal bipyramid units to the TeO3 trigonal pyramid structural units.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2009

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable