Hostname: page-component-7b7567c8c-m6dxt Total loading time: 0 Render date: 2026-11-19T00:52:17.909Z Has data issue: false hasContentIssue false

Microstructural evolution of Sn–Ag–Cu–Al solder with respect to Al content and heat treatment

Published online by Cambridge University Press:  31 January 2011

Kwang-Lung Lin
Affiliation:
Department of Materials Science and Engineering, National Cheng Kung University, Tainan, Taiwan 701, Republic of China
Chih-Chun Hsiao
Affiliation:
Department of Materials Science and Engineering, National Cheng Kung University, Tainan, Taiwan 701, Republic of China
Kaug-I Chen
Affiliation:
Department of Materials Science and Engineering, National Cheng Kung University, Tainan, Taiwan 701, Republic of China
Get access

Abstract

The Pb-free Sn–Ag–Cu–Al solders were investigated for microstructural evolution with respect to Al% and heat treatment. The Al% varies from 0.1% to 0.45% while the contents of Ag are 3.1%–2.53% and of Cu are 0.41%–0.33%. Differential scanning colorimetry (DSC) was applied to identify the melting behavior. A monotectic temperature of 224 °C and a eutectic temperature of 220 °C are deduced from the DSC results. The microstructure was characterized with x-ray diffraction and scanning electron microscopy-energy dispersive spectroscopy. Ag3Sn and the γ2 phase of Al–Cu system are the intermetallic compounds formed in the as-cast solders. Cu6Sn5 formed upon heat treatment for 1000 h at 150 °C in the 0.45 Al-containing solder, while not found in the other solders or other heat treatment conditions. Sn whiskers were detected in a 0.45 Al-containing specimen after aging for 50 h.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable