Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-18T06:22:37.445Z Has data issue: false hasContentIssue false

Microstructural inhomogeneities in chemically derived Ba2YCu3O7−x thin films: Implications for flux pinning

Published online by Cambridge University Press:  03 March 2011

P.C. McIntyre
Affiliation:
Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139
M.J. Cima
Affiliation:
Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139
Get access

Abstract

A gradient in the density of polytypoidal stacking faults was observed through the thickness of chemically derived epitaxial Ba2YCu3O7−x (BYC) films on (001) LaAlO3. Cross-sectional TEM studies indicated that films of less than 100 nm thickness were faulted, with a high density of polytypoidal stacking faults. A decrease in stacking fault density in thicker films (300-500 nm thick) was found with increasing distance from the most defective layer near the film/substrate interface. An abrupt transition from highly faulted material near the substrate to essentially stacking fault-free BYC in the upper part of the films was observed in several cases. The present observations are compared with the previously reported1 decrease in critical current density with increasing thickness of these films. Possible implications for flux pinning in BYC thin films are discussed.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable