Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T07:18:21.590Z Has data issue: false hasContentIssue false

Microstructure and mechanical properties of multiphase NiAl-based alloys

Published online by Cambridge University Press:  31 January 2011

D.R. Panka
Affiliation:
Department of Materials Science and Engineering, The Pennsylvania State University, University Park, Pennsylvania 16802
M.V. Nathal
Affiliation:
NASA Lewis Research Center, Cleveland, Ohio 44135
D.A. Koss
Affiliation:
Department of Materials Science and Engineering, The Pennsylvania State University, University Park, Pennsylvania 16802
Get access

Abstract

The effect of the γ′ phase on the deformation behavior fracture resistance of melt-spun ribbons and consolidated bulk specimens of a series of NiAl-based alloys with Co and Hf additions has been examined. The morphology, location, and volume fraction of the γ′ phase are significant factors in enhancing the fracture resistance of the normally brittle NiAl-based alloys. In particular, the results indicate that a continuous grain boundary film of γ′ can impart limited room temperature ductility regardless of whether B2 or L10 NiAl is present. Guidelines for microstructure control in multi-phase NiAl-based alloys are also presented.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable