Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T02:09:02.565Z Has data issue: false hasContentIssue false

Microstructure and mechanical strength of diffusion-bonded Ti3SiC2/Ni joints

Published online by Cambridge University Press:  03 March 2011

X.H. Yin
Affiliation:
Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China and Graduate School of Chinese Academy of Sciences, Beijing 100039, China
M.S. Li*
Affiliation:
Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China
Y.C. Zhou
Affiliation:
Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China
*
a) Address all correspondence to this author. E-mail: mshli@imr.ac.cn
Get access

Abstract

Diffusion bonding of Ti3SiC2 and nickel has been conducted at temperatures of 800 °C–1100 °C for 10–90 min under 6–20 MPa in a vacuum. The phase composition and microstructure of the joints were investigated by X-ray diffraction, scanning electron microscopy, and electron probe microanalysis. The total diffusion path of the joining is determined to be Ni/Ni31Si12 + Ni16Ti6Si7 + TiCx/Ti3SiC2 + Ti2Ni + TiCx/ Ti3SiC2. The growth of the reaction layer follows parabolic law, and the temperature dependence of the reaction constant, k, can be expressed as k = 1.68 × 10−4 exp(−118 ± 12 kJ/RT) m/s1/2. The diffusion of nickel through the reaction zone toward Ti3SiC2 is the main controlling step in the bonding process. Joint strengths were determined through shear tests. The maximum shear strength of 121 ± 7 MPa, which is close to the shear strength of Ti3SiC2, has been obtained under the condition of 1000 °C for 10 min under 20 MPa.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable