Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T16:11:50.383Z Has data issue: false hasContentIssue false

Microstructure and properties of pressureless sintered ZrC-based materials

Published online by Cambridge University Press:  31 January 2011

Laura Silvestroni
Affiliation:
National Research Council—Institute of Science and Technology for Ceramics (CNR-ISTEC), I-48018 Faenza, Italy
Diletta Sciti*
Affiliation:
National Research Council—Institute of Science and Technology for Ceramics (CNR-ISTEC), I-48018 Faenza, Italy
*
a)Address all correspondence to this author. e-mail: diletta.sciti@istec.cnr.it
Get access

Abstract

ZrC-based composites were produced by pressureless sintering thanks to the addition of MoSi2 as sintering aid. After preliminary tests, a baseline ZrC material and two mixed ZrC–HfC and ZrC–ZrB2 composites with 20 vol% MoSi2 were densified at 1900 to 1950 °C reaching final relative densities of 96%–98%. Mean particle size of the dense bodies ranged from 5 to 9 μm. Secondary phases were found to form during sintering, such as SiC and Zr–Mo–Si-based compounds. Room-temperature mechanical properties were in the range of the values reported in the literature for similar materials densified by pressure-assisted techniques. The flexural strength was tested at room temperature, 1200 and 1500 °C.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable