Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T15:06:21.796Z Has data issue: false hasContentIssue false

Microstructure of liquid phase sintered superplastic silicon carbide ceramics

Published online by Cambridge University Press:  31 January 2011

Chong-Min Wang
Affiliation:
National Institute for Research in Inorganic Materials, Namiki 1–1, Tsukuba-shi, Ibaraki, 305, Japan
Mamoru Mitomo
Affiliation:
National Institute for Research in Inorganic Materials, Namiki 1–1, Tsukuba-shi, Ibaraki, 305, Japan
Hideyuki Emoto
Affiliation:
National Institute for Research in Inorganic Materials, Namiki 1–1, Tsukuba-shi, Ibaraki, 305, Japan
Get access

Abstract

Superplastic silicon carbide ceramics were fabricated at low temperatures by a liquid phase sintering very fine β–SiC powder. The microstructural features of this material, of both before and after the superplastic deformation, have been investigated by transmission electron microscopy. Evaluated from the point of view of phase transformation, dislocation motion, and dynamic grain growth, the materials show very stable microstructures, indicating that the superplastic deformation process was dominated by the liquid phase assisted grain boundary sliding. In addition, the material is also characterized by the formation of clusters of fine SiC particles (5–20 nm) encapsulated in layered graphitized carbon.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable