Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-18T06:06:59.959Z Has data issue: false hasContentIssue false

Microwave sintering and properties of AlN/TiB2 composites

Published online by Cambridge University Press:  31 January 2011

Geng-fu Xu
Affiliation:
Department of Materials and Nuclear Engineering, University of Maryland, College Park, Maryland 20742
Yuval Carmel
Affiliation:
Institute for Research in Electronics and Applied Physics, University of Maryland, College Park, Maryland 20742
Tayo Olorunyolemi
Affiliation:
Institute for Research in Electronics and Applied Physics, University of Maryland, College Park, Maryland 20742
Isabel K. Lloyd
Affiliation:
Department of Materials and Nuclear Engineering and Institute for Research in Electronics and Applied Physics, University of Maryland, College Park, Maryland 20742
Otto C. Wilson Jr.
Affiliation:
Department of Materials and Nuclear Engineering and Institute for Research in Electronics and Applied Physics, University of Maryland, College Park, Maryland 20742
Get access

Abstract

The effect of TiB2 on the densification behavior and properties of microwave-sintered AlN/TiB2 ceramic was investigated. The densification of the composite was significantly retarded in nitrogen atmosphere due to strong nitridation of TiB2 compared to sintering in argon atmosphere. The densities of the AlN/TiB2 composites containing different amounts of TiB2 all reached 99% of the theoretical density during 2 h of sintering at 1850 and 1900 °C. Microstructure analysis revealed that the TiB2 particles were dispersed in the AlN matrix while AlN grains retained its contiguity. This microstructure led to a composite with superior properties; thermal conductivity as high as 149 W/(m K) was achieved. The microwave sintered composites are harder and tougher than pure AlN. Microwave-sintered AlN/TiB2 composite is a promising material for structural applications in which high thermal conductivity and controlled dielectric loss are important.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable