Hostname: page-component-7b7567c8c-slfcl Total loading time: 0 Render date: 2026-11-19T19:32:50.363Z Has data issue: false hasContentIssue false

Modified resin–intermediate processing of perovskite powders: Part I. Optimization of polymeric precursors

Published online by Cambridge University Press:  31 January 2011

Lone-Wen Tai
Affiliation:
Ceramic Engineering Department, University of Missouri–Rolla, Rolla, Missouri 65401
Paul A. Lessing
Affiliation:
Ceramics Section, EG&G Idaho, Inc., Idaho National Engineering Laboratory, Idaho Falls, Idaho 83415
Get access

Abstract

The formation of a polyester between citric acid (CA) and ethylene glycol (EG) was found to be a decisive factor for the foaming of resin intermediates in a Pechini-type powder process. This process was modified by changing the organic mass ratio of CA/EG which results in ceramic powders with different morphologies. The most porous resin intermediate (with or without chelated cations) was prepared using a polymeric gel made of equimolar citric acid and ethylene glycol. It was also found that a premixing of organic components, prior to adding constituent nitrate solutions, makes the whole process more controllable.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable