Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T09:20:21.908Z Has data issue: false hasContentIssue false

Multifunctional microtruss laminates: Textile synthesis and properties

Published online by Cambridge University Press:  26 November 2012

D. J. Sypeck
Affiliation:
Department of Materials Science and Engineering, 116 Engineer's Way, School of Engineering and Applied Science, University of Virginia, Charlottesville, Virginia 22904
H. N. G. Wadley
Affiliation:
Department of Materials Science and Engineering, 116 Engineer's Way, School of Engineering and Applied Science, University of Virginia, Charlottesville, Virginia 22904
Get access

Abstract

Open cell periodic metal truss structures can exhibit significantly higher stiffnesses and strengths than stochastic cellular metal structures of the same relative density while still providing high mechanical energy absorption and efficient heat exchange opportunities. Here, a potentially inexpensive textile-based approach to the synthesis of periodic metal microtruss laminates is reported. The process consists of selecting a wire weave, laying up the mesh and joining using a transient liquid phase. Example structures constructed from nichrome (Ni–24Fe–16Cr) wire cloth were made and tested. These exhibited a linear dependence of stiffness and strength upon relative density, absorbed large amounts of mechanical energy, and showed good potential for efficient heat exchange.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable