Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-15T19:38:15.031Z Has data issue: false hasContentIssue false
  • English
  • Français

Nanoindentation and microstructural evolution of polycrystalline gold

Published online by Cambridge University Press:  31 January 2011

Jeong Beom Ma and
M.A. Zikry
Jeong Beom Ma
Affiliation:
Department of Mechanical and Aerospace Engineering, North Carolina State University, Raleigh, North Carolina 27695-7910
M.A. Zikry*
Affiliation:
Department of Mechanical and Aerospace Engineering, North Carolina State University, Raleigh, North Carolina 27695-7910
*
a) Address all correspondence to this author. e-mail: zikry@ncsu.edu
Get access

Abstract

A finite-element (FE) microstructurally based dislocation density multiple-slip crystalline formulation that is coupled to molecular dynamic (MD) simulations has been used to predict how nanoindentation affects behavior in crystalline gold polycrystals at scales that span the molecular to the continuum level. Displacement profiles from MD simulations of nanoindentation were used to obtain scaling relations, which are based on indented depths, grain sizes, and grain aggregate distributions. These scaling relations are then used in a microstructurally based FE formulation that accounts for dislocation density evolution, crystalline structures, and grain sizes. This hierarchical methodology can be used to ascertain inelastic effects, such as shear-slip distribution, pressure accumulation, and dislocation density and slip-rate evolution at physical scales that are commensurate with ductile behavior at the microstructural scale.

Keywords

MicrostructureNanoindentationPolycrystal

Information

Type
Articles
Information
Journal of Materials Research , Volume 24 , Issue 3 , March 2009, pp. 1093 - 1104
Copyright
Copyright © Materials Research Society 2009

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

1.Lim, Y.Y. and Chaudhri, M.M.: Nanohardness mapping of the curved surface of a spherical macroindentation in fully annealed polycrystalline oxygen-free copper. Phys. Status Solidi A 194, 19 (2002).Google Scholar
2.Gane, N. and Bowden, F.P.: Microdeformation of solids. J. Appl. Phys. 39(3), 1432 (1968).Google Scholar
3.Greer, J.R. and Nix, W.D.: Size dependence of mechanical properties of gold at the sub-micron scale. Appl. Phys. A. 80(8), 1625 (2005).Google Scholar
4.Gerberich, W.W., Tymiak, N.I., Grunlan, J.C., Horstemeyer, M.F., and Baskes, M.I.: Interpretations of indentation size effects. J. Appl. Mech. 69(4), 433 (2002).CrossRefGoogle Scholar
5.Smith, J.F. and Zheng, S.: High temperature nanoscale mechanical property measurements. Surf. Eng. 16(2), 143 (2000).Google Scholar
6.Michalske, T.A. and Houston, J.E.: Dislocation nucleation at nanoscale mechanical contacts. Acta Mater. 46(2), 391 (1998).Google Scholar
7.Kiely, J.D. and Houston, J.E.: Nanomechanical properties of Au (111), (001), and (110) surfaces. Phys. Rev. B 57(19), 12588 (1998).Google Scholar
8.Kiely, J.D., Jarausch, K.F., Houston, J.E., and Russell, P.E.: Initial stages of yield in nanoindentation. J. Mater. Res. 14(6), 2219 (1999).Google Scholar
9.Tawara, T., Matsukawa, Y., and Kiritani, M.: Defect structure of gold introduced by high-speed deformation. Mater. Sci. Eng., A 350(1–2), 70 (2003).Google Scholar
10.Schall, J.D. and Brenner, D.W.: Atomistic simulation of the influence of pre-existing stress on the interpretation of nanoindentation data. J. Mater. Res. 19(11), 3172 (2004).Google Scholar
11.Zimmerman, J.A., Kelchner, C.L., Klein, P.A., Hamilton, J.C., and Foiles, S.M.: Surface step effects on nanoindentation. Phys. Rev. Lett. 8716(16), 165507 (2001).Google Scholar
12.Knap, J. and Ortiz, M.: Effect of indenter-radius size on Au(001) nanoindentation. Phys. Rev. Lett. 90(22), 226102 (2003).CrossRefGoogle ScholarPubMed
13.Kelchner, C.L., Plimpton, S.J., and Hamilton, J.C.: Dislocation nucleation and defect structure during surface indentation. Phys. Rev. B 58(17), 11085 (1998).Google Scholar
14.Hasnaoui, A., Derlet, P.M., and Van, H.Swygenhoven: Interaction between dislocations and grain boundaries under an indenter: A molecular dynamics simulation. Acta Mater. 52(8), 2251 (2004).Google Scholar
15.Jeng, Y.R. and Tan, C.M.: Study of nanoindentation using FEM atomic model. J. Tribol. 126(4), 767 (2004).CrossRefGoogle Scholar
16.Choi, Y., Van Vliet, K.J., Li, J., and Suresh, S.: Size effects on the onset of plastic deformation during nanoindentation of thin films and patterned lines. J. Appl. Phys. 94 (9), 6050 (2003).Google Scholar
17.Phillips, R., Rodney, D., Shenoy, V., Tadmor, E., and Ortiz, M.: Hierarchical models of plasticity: Dislocation nucleation and interaction. Modell. Simul. Mater. Sci. Eng. 7(5), 769 (1999).Google Scholar
18.Suresh, S., Nieh, T.G., and Choi, B.W.: Nano-indentation of copper thin films on silicon substrates. Scr. Mater. 41(9), 951 (1999).Google Scholar
19.Lilleodden, E.T., Zimmerman, J.A., Foiles, S.M., and Nix, W.D.: Atomistic simulations of elastic deformation and dislocation nucleation during nanoindentation. J. Mech. Phys. Solids 51(5), 901 (2003).Google Scholar
20.Matsukawa, Y., Yasunaga, K., Komatsu, M., and Kiritani, M.: Dynamic observation of dislocation-free plastic deformation in gold thin foils. Mater. Sci. Eng., A 350(1–2), 8 (2003).Google Scholar
21.Ma, J.B., Zikry, M.A., Ashmawi, W.M., and Brenner, D.W.: Hierarchical modeling of nanoindentation and microstructural evolution of face-centered cubic gold aggregates. J. Mater. Res. 22(3), 627 (2007).CrossRefGoogle Scholar
22.Zikry, M.A. and Kao, M.: Inelastic microstructural failure mechanisms in crystalline materials with high angle grain boundaries. J. Mech. Phys. Solids 44(11), 1765 (1996).Google Scholar
23.Ashmawi, W.M. and Zikry, M.A.: Void nucleation and grain-boundary interfacial properties in ductile materials. Philos. Mag. A 83, 391 (2003).Google Scholar
24.Zikry, M.A.: An accurate and stable algorithm for high strain-rate finite strain plasticity. Commit. Structures 50(3), 337 (1994).Google Scholar
25.McCann, M.M. and Corcoran, S.G.: Nanoindentation behavior of gold single crystals, in Thin Films-Stresses and Mechanical Properties X, edited by Corcoran, S.G., Joo, Y-C., Moody, N.R., and Suo, Z. (Mater. Res. Soc. Symp. Proc. 795, Warrendale, PA, 2004), U8.30.Google Scholar
26.Kameda, T. and Zikry, M.A.: Intergranular and transgranular crack growth at triple junction boundaries in ordered intermetallics. Int. J. Plast. 14(8), 689 (1998).CrossRefGoogle Scholar
27.Randle, V.: The Measurement of Grain Boundary Geometry (Institute of Physics Publishing, Bristol and Philadelphia, PA, 1993).Google Scholar
28.Ashmawi, W.M. and Zikry, M.A.: Effects of grain boundary and dislocation density evolution on large strain deformation modes in fcc crystalline materials. J. Comput. Aided Mater. Des. 7(1), 55 (2000).Google Scholar
29.Ohmura, T., Minor, A.M., Stach, E.A., and Morris, J.W. Jr: Dislocation-grain boundary interactions in martensitic steel observed through in situ nanoindentation in a transmission electron microscope. J. Mater. Res. 19(12), 3626 (2004).CrossRefGoogle Scholar