Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T00:48:36.131Z Has data issue: false hasContentIssue false

Numerical Analyses of Fluid Dynamics of an Atomization Configuration

Published online by Cambridge University Press:  31 January 2011

Q. Xu
Affiliation:
Department of Chemical and Biochemical Engineering and Materials Science, University of California, Irvine, California 92697
D. Cheng
Affiliation:
Department of Chemical and Biochemical Engineering and Materials Science, University of California, Irvine, California 92697
G. Trapaga
Affiliation:
Laboratory of Investigation in Materials of CINVESTAV-IPN, Unidad Quertaro, C.P. 76230, Quertaro, Qro, Mexico
N. Yang
Affiliation:
Organization 8715, Sandia National Laboratories, 7011 East Avenue, P.O. Box 969, Livermore, California 94550
E.J. Lavernia
Affiliation:
Department of Chemical and Biochemical Engineering and Materials Science, University of California, Irvine, California 92697
Get access

Abstract

Computational fluid dynamic techniques were used to analyze the gas flow behavior of a typical atomization configuration. The calculated results are summarized as follows. The atomization gas flow at the atomizer's exit may be either subsonic at ambient pressure or sonic at an underexpanded condition, depending on the magnitude of the inlet gas pressure. When the atomization gas separates to become a free annular gas jet, a closed recirculating vortex region is formed between the liquid delivery tube and the annular jet's inner boundary. Upon entering the atomization chamber, an underexpanded sonic gas flow is further accelerated to supersonic velocity during expansion. This pressure adjustment establishes itself in repetitive expansion and compression waves. A certain protrusion of the liquid delivery tube is crucial to obtain a stable subatmospheric pressure region at its exit. The vortex flow under the liquid delivery tube tends to transport liquid metal to the high kinetic energy gas located outside the liquid delivery tube, thereby leading to an efficient atomization.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable