Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T21:26:10.123Z Has data issue: false hasContentIssue false

A numerical approach to evaluation of elastic modulus using conical indenter with finite tip radius

Published online by Cambridge University Press:  31 January 2011

Jin Haeng Lee*
Affiliation:
Department of Mechanical Engineering, Sogang University, Seoul 121-742, Republic of Korea
Hyungyil Lee
Affiliation:
Department of Mechanical Engineering, Sogang University, Seoul 121-742, Republic of Korea
Deok Hoon Kim
Affiliation:
Department of Mechanical Engineering, Sogang University, Seoul 121-742, Republic of Korea
*
a)Address all correspondence to this author. e-mail: jinhaeng@sogang.ac.kr Present address: Department of Materials Science and Engineering, University of Tennessee, Knoxville, TN 37996.
Get access

Abstract

Geometrical self-similarity is a feature of mathematically sharp indenters such as conical and Berkovich indenters. However, self-similarity is considered inappropriate for practical use because of inevitable indenter tip blunting. In this study, we analyze the load–depth curves of conical indenters with various tip radii via finite element analyses. Based on the numerical data, we propose a method of restoring the Kick’s law coefficient C of finite tip-radius indenter to that of zero tip-radius indenter, thereby retaining the self-similarity of the sharp indenter. We then regress the unloading slope for the evaluation of elastic modulus in several ways. Finally, we establish a method to evaluate elastic modulus, which successfully provides the value of the elastic modulus with a maximum error of less than 5%, regardless of tip radius and material properties of both indenter and specimen.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable