Hostname: page-component-7b7567c8c-slfcl Total loading time: 0 Render date: 2026-11-19T18:36:40.761Z Has data issue: false hasContentIssue false

Oxidation behavior of bulk Ti3SiC2 at intermediate temperatures in dry air

Published online by Cambridge University Press:  01 February 2006

H.B. Zhang
Affiliation:
Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, People’s Republic of China
Y.C. Zhou*
Affiliation:
Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, People’s Republic of China
Y.W. Bao
Affiliation:
Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, People’s Republic of China
J.Y. Wang
Affiliation:
Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, People’s Republic of China
*
a)Address all correspondence to this author. e-mail: yczhou@imr.ac.cn
Get access

Abstract

The isothermal oxidation behavior of bulk Ti3SiC2 at intermediate temperatures from 500 to 900 °C in flowing dry air was investigated. An anomalous oxidation with higher kinetics at lower temperatures was observed. This phenomenon resulted from the formation of microcracks in the oxide scales at low temperatures. The generation of these microcracks was caused by a phase change in the oxide products, i.e., the transformation of anatase TiO2 to rutile TiO2. This phase transformation resulted in tensile stress, which provided the driving force for the formation of the microcracks during oxidation. Despite the existence of microcracks, the intermediate-temperature oxidation of Ti3SiC2 generally obeyed the parabolic rate law and did not exhibit catastrophic destruction due to the fact that cracks occurring in the oxide layers were partially filled with amorphous SiO2. Therefore, further high oxidation kinetics was prevented.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable