Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-15T23:22:02.753Z Has data issue: false hasContentIssue false

Phase identification in a U–Zr/Ni–Cr diffusion couple using synchrotron radiation

Published online by Cambridge University Press:  31 January 2011

M. C. Petri
Affiliation:
Argonne National Laboratory, 9700 South Cass Avenue, Argonne, Illinois 60439
L. Leibowitz
Affiliation:
Argonne National Laboratory, 9700 South Cass Avenue, Argonne, Illinois 60439
M. H. Mueller
Affiliation:
Argonne National Laboratory, 9700 South Cass Avenue, Argonne, Illinois 60439
J. W. Richardson Jr.
Affiliation:
Argonne National Laboratory, 9700 South Cass Avenue, Argonne, Illinois 60439
D. D. Keiser Jr.
Affiliation:
Argonne National Laboratory, P.O. Box 2528, Idaho Falls, Idaho 83403
Get access

Abstract

The diffusion zone between a U–23 at. % Zr alloy and a Ni–16.4 at. % Cr alloy exhibited nine distinct phase layers, many of which were mixtures of two phases. Four single-phase regions were less than 10 μm wide. To identify these phases by diffractometry, a synchrotron x-ray beam was collimated by a 50 μm by 1 mm slit. This beam was translated across the sample to obtain diffraction patterns throughout the diffusion zone. In this way, only a few phases were simultaneously within the beam, easing identification of the phases. Strains in the lattice due to solid solution were also observed. These microdiffraction techniques are applicable to a wide range of material systems.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable