Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T16:41:31.365Z Has data issue: false hasContentIssue false

Plastic deformation in impure nanocrystalline ceramics

Published online by Cambridge University Press:  31 January 2011

Rachman Chaim
Affiliation:
Department of Materials Engineering, Technion–Israel Institute of Technology, Haifa 32000 Israel
Get access

Abstract

Plastic deformation behavior of impure nanocrystalline ceramics (NCC) was modeled using the percolative composite model in conjunction with models for plastic deformation by grain boundary sliding. The “glass transition temperature” concept was used to determine the threshold strain rate criterion below which the impure nanocrystalline ceramic would deform plastically. Threshold strain rate is stress independent. It increases with the temperature increase and with the grain size decrease. Using the dissolution-precipitation model, dependence of the strain rate on temperature, stress, and grain size in the nanometer regime for impure NCCs was calculated. As an example, the critical conditions for plasticity in impure yttria-tetragonal zirconia polycrystals (Y-TZP) were evaluated. At 600 °C, strain rates as high as 10−4 s−1 were expected in 10 nm impure Y-TZP. Comparison of the published data extrapolated into the nanometer range to the calculated threshold level showed that increase in the applied stress is associated with increase in the grain size and strain rate onsets for plastic deformation.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable