Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T15:32:38.712Z Has data issue: false hasContentIssue false

Plasticity in ion-irradiated austenitic stainless steels

Published online by Cambridge University Press:  31 January 2011

C. Robertson
Affiliation:
Section de Recherches de Métallurgie Physique, Direction des Technologies Avancées, Commissariat à l'Energie Atomique, Centre d'Etudes de Saclay, 91191 Gif-sur-Yvette, France
S. Poissonnet
Affiliation:
Section de Recherches de Métallurgie Physique, Direction des Technologies Avancées, Commissariat à l'Energie Atomique, Centre d'Etudes de Saclay, 91191 Gif-sur-Yvette, France
L. Boulanger
Affiliation:
Section de Recherches de Métallurgie Physique, Direction des Technologies Avancées, Commissariat à l'Energie Atomique, Centre d'Etudes de Saclay, 91191 Gif-sur-Yvette, France
Get access

Abstract

In an attempt to take advantage of charged particle irradiation for studying the effects of irradiation on the mechanical properties of metals, we developed an experimental procedure based on the combination of transmission electron microscopy (TEM) and submicron indentation of ion-implanted layers. We applied this technique to industrial 316L steel, irradiated with krypton ions up to 10 dpa at 873 K. A domain where the penetration range of the ions and the indentation depth are compatible has been identified. The indentation tests then yielded a good estimate of hardness and bulk modulus, while the TEM observations provide microstructural information in the plastic regime. It is shown that the combination of the two techniques is necessary for rationalizing the observed results.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable