Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T00:59:31.797Z Has data issue: false hasContentIssue false

A precise correcting method for the study of the superhard material using nanoindentation tests

Published online by Cambridge University Press:  03 March 2011

Yan Ping Cao
Affiliation:
Laboratoire des Systèmes Mécaniques et d’ingénierie Simultanée, Université de Technologie de Troyes, 10010 Troyes, France; and Forschungszentrum Karlsruhe, Institut für Materialforschung II, D-76344 Eggenstein-Leopoldshafen, Germany
Ming Dao
Affiliation:
Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139
Jian Lu*
Affiliation:
Department of Mechanical Engineering, Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong
*
a) Address all correspondence to this author. e-mail: mmmelu@inet.polyu.edu.hk
Get access

Abstract

The accurate description of the indentation load–displacement relationship of an elastic sharp indenter indenting into an elastic half-space is critical for analyzing the nanoindentation data of superhard materials using the procedure proposed by Oliver and Pharr [J. Mater. Res.7, 1564 (1992)]. A further discussion on this issue is made in the present work to reconcile the apparent inconsistencies that have appeared between the experimental results reported by Lim and Chaudhri [Philos. Mag.83, 3427 (2003)] and the analysis performed by Fischer-Cripps [J. Mater. Res.18, 1043 (2003)]. It is found that the indenter size effect is responsible for this large discrepancy. Moreover, according to our analysis, we found that when the deformation of the indenter is significant, besides the errors caused by the Sneddon’s boundary condition as addressed by Hay et al. [J. Mater. Res.14, 2296 (1999)], the errors induced by the application of reduced modulus should be considered at the same time in correcting the modified Sneddon’s solution. In the present work, for the diamond indenter of 70.3° indenting into an elastic half-space with its Poisson’s ratio varying from 0.0 to 0.5 and the ratio of the Young’s modulus of the indented material to that of the diamond indenter, Ematerial/Eindenter, varying from 0 to 1, a set of new correction factors are proposed based on finite element analysis. The results reported here should provide insights into the analysis of the nanoindentation load–displacement data when using a diamond indenter to determine the hardness and Young’s modulus of superhard materials.

Keywords

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable