Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T19:59:04.008Z Has data issue: false hasContentIssue false

Preparation, microstructure, and microhardness of selective laser-melted W–3Ta sample

Published online by Cambridge University Press:  15 April 2020

Junfeng Li*
Affiliation:
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an 710049, China
Zhengying Wei
Affiliation:
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an 710049, China
Bokang Zhou
Affiliation:
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an 710049, China
Yunxiao Wu
Affiliation:
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an 710049, China
Sheng-Gui Chen
Affiliation:
School of Mechanical Engineering, Dongguan University of Technology, Dongguan 523808, China
Zhenzhong Sun
Affiliation:
School of Mechanical Engineering, Dongguan University of Technology, Dongguan 523808, China
*
a)Address all correspondence to this author. e-mail: xjljf2014@stu.xjtu.edu.cn
Get access

Abstract

Tungsten (W) alloy is of difficulty in processing for conventional way because of its high melting point. Here, W alloy sample with the addition of 3 wt% Ta was prepared by selective laser melting. The influence of volumetric energy density (VED) on the surface morphology and the relative density was discussed, and microstructure, phase composition, and microhardness were investigated. The results show that a smooth surface and high relative density (95.79%) can be obtained under optimal VED. The W–Ta substitutional solid solution formed because of the replacement of Ta atom. There are strip and block fine grains in the W–3Ta sample with no significant texture. In addition, subgrain structure with a size of around 1 μm formed inside the strip grain, owing to the large thermal gradient and extremely fast cooling rate. Finally, the W–3Ta alloy shows higher microhardness than that obtained by traditional methods.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable