Hostname: page-component-7b7567c8c-2jgqx Total loading time: 0 Render date: 2026-11-19T17:12:15.239Z Has data issue: false hasContentIssue false

Preparation of fine-grained monoclinic zirconia ceramics by colloidal processing

Published online by Cambridge University Press:  31 January 2011

T. Uchikoshi
Affiliation:
National Research Institute for Metals, 1–2–1, Sengen, Tsukuba, Ibaraki 305, Japan
Y. Sakka
Affiliation:
National Research Institute for Metals, 1–2–1, Sengen, Tsukuba, Ibaraki 305, Japan
K. Ozawa
Affiliation:
National Research Institute for Metals, 1–2–1, Sengen, Tsukuba, Ibaraki 305, Japan
K. Hiraga
Affiliation:
National Research Institute for Metals, 1–2–1, Sengen, Tsukuba, Ibaraki 305, Japan
Get access

Abstract

Fine-grained monoclinic zirconia ceramic was made from well-dispersed zirconia sol prepared by the hydrolysis of zirconium chloride oxide octahydrate. Dechlorinated and concentrated zirconia sol was consolidated by pressure filtration. The relative green density of the compact was improved by the following cold isostatic pressing treatment at 400 MPa. The compact was densified by pressureless sintering to >98% of theoretical density in air at 1100 °C, which is lower than that of monoclinic to tetragonal transformation of pure zirconia. The average grain size of the sintered monoclinic zirconia ceramics was 92 nm.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable