Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T05:22:37.404Z Has data issue: false hasContentIssue false

Selective growth and kinetic study of copper oxide nanowires from patterned thin-film multilayer structures

Published online by Cambridge University Press:  31 January 2011

Nitin Chopra
Affiliation:
Chemical and Materials Engineering Department, University of Kentucky, Lexington, Kentucky 40506
Bing Hu
Affiliation:
Chemical and Materials Engineering Department, University of Kentucky, Lexington, Kentucky 40506
Bruce J. Hinds*
Affiliation:
Chemical and Materials Engineering Department, University of Kentucky, Lexington, Kentucky 40506
*
a)Address all correspondence to this author. e-mail: bjhinds@engr.uky.edu
Get access

Abstract

Selective growth of CuO nanowires on the etched face of Al2O3/Cu/Al2O3 thin-film multilayer patterns was achieved by ambient oxidation at 400 °C. The nanowires were observed to selectively grow only from the pattern edge with diameter limited by the thickness of Cu thin film. Transmission-electron-microscopy (TEM) characterization confirmed CuO nanowires of a monoclinic CuO growing in the [010] crystallographic direction. Nanowire growth kinetics was studied at 400 °C for different cumulative growth durations with initial growth rates of ∼1 nm/min. A base growth mechanism with kinetics limited by oxygen diffusion through defects of a scaling oxide film is consistent with observed kinetics. The oxygen diffusivity is found to be ∼10−11 cm2/s, consistent with the grain-boundary diffusion of oxygen through polycrystalline copper oxide.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable