Hostname: page-component-7b7567c8c-w7t8q Total loading time: 0 Render date: 2026-11-18T19:10:54.078Z Has data issue: false hasContentIssue false

Self-organization in porous 6H–SiC

Published online by Cambridge University Press:  31 January 2011

S. Zangooie
Affiliation:
Center for Microelectronic and Optical Materials Research, and Department of Electrical Engineering, University of Nebraska, Lincoln, Nebraska 68588–0511
J. A. Woollam
Affiliation:
Center for Microelectronic and Optical Materials Research, and Department of Electrical Engineering, University of Nebraska, Lincoln, Nebraska 68588–0511
H. Arwin
Affiliation:
Department of Physics and Measurements Technology, Laboratory of Applied Optics, Linköping University, SE-58183, Sweden
Get access

Abstract

Pores in porous 6H–SiC were found to propagate first nearly parallel with the basal plane and gradually change direction and align with the c axis. As a consequence, well-defined columnar pores were formed. It was shown that the rate of change of propagation directions was influenced by the etching parameters, such as hydrofluoric acid concentration and current density. Larger currents resulted in formation of larger pores. Pore sizes were found to increase with depth due to a decrease of the acid concentration. In addition, due to chemical etching effects, larger pore sizes were obtained close to the sample surface.

Information

Type
Rapid Communications
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable